Items Expiring!

You have items in your cart that are about to expire.

if you want to keep all selected items in your cart, please confirm.

Digital Gift Cards Now Available Online!
Home / F - Waxes & Table Top Finishes / LD - Fusion SFO - Ebony

LD - Fusion SFO - Ebony

Item has been added to cart.

SKU:

$

in stock

Stain & Finishing Oil is a wood conditioner, stain and topcoat all in one that offers exceptional durability in high traffic areas like table tops, kitchen cabinets, and even flooring.
Can be used on bare wood or over previously painted surfaces.
No additional top coat required - it is highly durable as is. If you're looking for added durability, applying a coat of Natural will increase sheen and durability without intensifying your color.
If you apply it over Fusion Mineral Paint™ for a glaze effect or to increase the sheen, we recommend removing excess right away, as the SFO will not soak in and may leave a sticky finish that takes a few days to dry.
Use the Natural color over Fusion Mineral Paint™ colors to increase the sheen and offer superior durability, or brush on one of the pigmented colors and wipe off immediately for a beautiful, easy glaze effect.
Our special blend is highly concentrated in pigment, so a little goes a long way. The 237 mL container will cover the same area as 1 liter of comparable stains.
Please keep in mind that all oil based products typically yellow in time. Using this over top of a white paint, will cause a slight yellowing effect. We recommend our Tough Coat for going over lighter colors to avoid yellowing.

Application Tool: Brush, lint free rag, applicator pad
Location: Interior/Exterior
Re-coat: Time 9 hrs.
Topcoat: No additional topcoat is required. - this is made strong enough for floors and tabletops. However, you may use wax or "Natural" color Stain & Finishing Oil to increase the sheen but not deepen the color.
Clean Up: Odorless Solvent
Coverage: 40-75 sq.ft.
Finish/Sheen: Matte to high sheen. Each additional layer and buffing increases the sheen.
Recommended Use: Reclaimed wood, bare wood, tabletops, floors, most any surface, painted finish or Milk Painted pieces.
Can Be Applied To: Use as a stain over raw or well-sanded wood; apply over painted surface for added sheen, glaze effect, or added protection; seal milk paint or other porous paint. Not recommended over light colors as it will yellow.
Can Be Painted Over
Once dried if over bare wood and only 1 coat applied, 10 days after for multiple coats applied. Test to ensure prior to tackling a full project.
How to Prep: Apply over any surface or topcoat for desired effect except wax.
Cure Time : 10 Days
Maintenance/ Cleaning: Light cleaners, as they will strip away the natural oil.

DIRECTIONS
How To Use on Bare Wood: pour or brush onto evenly sanded surface, remove excess after 15-20 minutes. If desired, add a second coat after re-coat time for deeper color or more sheen. The pigment in it stains your wood accentuating the grain. SFO is a combination of natural oils and resins that penetrate into wood fibers to create a durable, scratch-resistant, waterproof finish. It does not leave a surface film that sits on top, but instead soaks into and becomes a part of your wood.
If applying over Fusion Mineral Paint, remove excess immediately.